Bat. T.: — °C ⚠Solar panel active (0.78V) Bat. temp may read too high due to interference from charging circuit. Reliable only when solar = 0V.
Started: 09 07 2024
306m above sea level
Time since start:
Avg. Volt.: V
Avg. Temp.: °C
Avg. Hum.: %
Avg. Press.: hPa
Voltage Trend:Temperature Trend:Humidity Trend:Pressure Trend:
Loading…
Avg. Voltage—
Avg. Temp.—
Avg. Humidity—
Avg. Pressure—
Min. Temp.—
Max. Temp.—
Min. Voltage—
Max. Voltage—
Loading…
Sunny days—
Avg. panel active—
Total battery gained—
Best day—
Live Forecast
Loading...
Generating... this takes 30-60 seconds.
Yesterday's Full Report
Archive
SIM7000G Firmware OTA
Device updates automatically on next wake-up after upload.
⏳ Pending flash: device on 4.24, server has 4.25 ready. Will flash on next OTA check.
--:--:--
interval: 3600s
--:--:--
in 6 wakes
4.25
465.3 KB
4.3
453.5 KB
4.3
453.5 KB
Export binary in Arduino IDE: Sketch → Export Compiled Binary.
Device checks OTA on boot 1 (after flash) then every 6 wakes.
Previous firmware saved as backup automatically.
Promote firmware.bin → backup.bin:
Promote backup.bin → safe.bin:
Safe Firmware Archive
Previous safe versions — automatically saved each time you promote a new Safe firmware.
Version
Archived
Size
No archived versions yet.
Archive current safe.bin:
Remote Commands
Device polls every boot. Command executes on next wake-up when v4.17+ is running.